• Support of 3G-SDI/HD-SDI/SD-SDI
• Frame Synchronizer for Return Signal
• 4 channels of Return Video Input
• Embedded Audio available as Standard
• Ethernet Port available
BS-98 is a 3G ready fiber transmission Base Station for UnicamHD series cameras. 3G transmission systems can be configured in combination with 3G ready cameras.
■3G Wideband transmission between camera head and CCU as well as 1.5G output.
■Selectable multi output port for 3G-SDI/HD-SDI/SD-SDI by the menu.
■4 channels RET video input as standard. 3G-SDI, HD-SDI and SD-SDI signals are automatically identified.
■By menu selection, HD Q-TV and RET signals output through the MON SDI connecter on the rear of a camera. Both HD Q-TV and Q-TV(VBS) can be used. Capable asynchronous image input and Embeded Audio x 4ch.
■QTV (VBS) x2 as standard.
(2nd channel is an option for FA-97A)
■HD-SDI TRUNK for the transmission of different video signal from camera between camera and CCU as option. Multiplexed ANC（Embedded AUDIO etc.）is available in case the signal is synchronized with a camera.(Only in 1.5G mode)
■Camera No. and ARC ID displayed on the front panel are convenient to use as well as capability of PGM3 and Y TALLY as standard.
HDTV System External Reference Input GENLOCK: Tri-level sync ot BBS 75 ohm BNC x2 (Loop Through)
(Input Signals) (HDTV/SDTV automatic detection)
SUB REF : 10 Field ID 75 ohm BNC x2 (Loop Through)
Return Video Input 75 ohm 3G/HD/SD-SDI Single End 4ch or 2ch Active-Through
(Menu Selection)
Q-TV (prompter) Input HD-QTV: HD-SDI 75 ohm single end 1ch
SDTV: VBS 75 ohm single end 1ch(2ch:factory option)
Output Signals Line Video Output 3G/HD-SDI Serial Digital 75 ohm BNC 2ch 4 outputs (OUT1/OUT2)
SMPTE 425M, SMPTE 372M, SMPTE292M standard
* 3G-SDI format supports Dual-Link outputs (Menu Selection)
SDTV signals Serial Digital 75 ohm BNC 1ch 2 outputs
(OUT3)SMPTE292M
VBS signal 1.0Vp-p 75 ohm BNC 1ch 2 outputs
Monitor Video Output 3G/HD-SDI Serial Digital 75 ohm BNC 1ch 1 output (HD PM)
*SMPTE 425M, SMPTE292M standard
Trunk Video Output HD-TRUNK : HD-SDI 75 ohm single end 1ch(factory option)
Intercom(ENG/PROD) 4-wire or Clearcom or RTS
4-wire 0dBm 600 ohm 2ch
Clearcom -15dBs 200 ohm 2ch
RTS 0dBs 200 ohm 2ch
MIC 0dBs 2ch 2 outputs Low impedance
Tally R/G/Y 3ch OPEN (OFF) / GND (ON) 50mA (max.)
Control Arcnet BNC x1ch
Ethernet RJ-45 x1ch
ICCP OCP/CCP x1, CCP/CSU x1
Operating Voltage AC100/110/117/220/240V±10%
Power Consumption approx. 80VA (BS only)
Ambient Temperature 0°C to +40°C (32°F to 104°F)
Relative Humidity 30% to 90% (Non-condensing)
Dimensions W218.6 x H125x D457mm
(W8.63 x H4.92 x D18.00 inches)(excluding protrusions)
Weight approx. 9kg (20 lbs)
RELATED ITEMS
Ņamera Heads: HDK-97ARRI, HDK-970A, HDK-97A, HDK-97C, HDK-95C, HDK-79GX, HDK-790GX,
HDK-55, HDK-5500
Ņamera Adaptors: FA-55, FA-97A
BASE STATIONS/CONTROL UNITS: CCU-980
